|
|
Raven Lining Systems offers versatile and proven wastewater coatings for restoration of deteriorated wastewater infrastructure and protection from the aggressive environment. Raven coatings are applied in wastewater collection systems and treatment plants by nationwide network of Certified Applicators.
Raven products include ultra high-build sprayable epoxies that provide excellent chemical resistance, adhesion and long-lasting service. These epoxies stop corrosion, eliminate infiltration and exfiltration and can be used to structurally rebuild severely deteriorated wastewater infrastructure.
Click on the links below each product to view product data sheets and material safety data sheets (you will need Adobe Acrobat to view these files).
Raven 400
Wastewater coating for extreme environments protecting from concentrated acid and offering moderate temperature resistance.
 Raven 400 TDS (.pdf, 117 KB)
Raven 400 MSDS (.pdf, 65 KB)
Raven 404
Tough, corrosion and abrasion resistant wastewater coating and stormwater system lining.
Raven 404 TDS (.pdf, 111 KB)
Raven 404 MSDS (.pdf, 65 KB)
Raven 405
Most widely used product providing excellent chemical resistance, adhesion to underground concrete substrates and formulated to provide structural renewal for severely deteriorated wastewater infrastructure.
Raven 405 TDS (.pdf, 118 KB)
Raven 405 MSDS (.pdf, 42 KB)
Raven 405FS
Designed for operating temperatures up to 200°F, 405FS’s high-build ability allows it to be applied on vertical and overhead surfaces. The surface tolerance of 405FS allows it to be used as a structural lining in manholes, pipelines, tanks and other deteriorated structures.
Raven 405FS TDS (.pdf, 118 KB)
 Raven 405FS MSDS (.pdf, 42 KB)
|
|
|
|
Raven 700
A fast setting, calcium aluminate cementitious product for use on concrete and masonry structures as a repair mortar. Designed for quick set and high early strength development 700's properties allow it to be efficiently applied to rehabilitate benches and inverts as well as to repair large voids or missing masonry components providing a suitable surface for the application of a Raven® 705CA underlayment and/or a polymer topcoat.
 Raven 700 TDS (.pdf, 44 KB)
Raven 700 MSDS (.pdf, 66 KB)
Raven 705CA
An acid resistant reinforced calcium aluminate cementitious product for use on concrete and masonry structures as a repair mortar. Designed as a reinforced stand alone product or as an underlayment for Raven coatings 705CA's properties allow it to be efficiently spray applied to rehabilitate substrates providing a suitable surface for the application of a polymer topcoat.
Raven 705CA TDS (.pdf, 44 KB)
Raven 705CA MSDS (.pdf, 66 KB)
Raven 715
A fast setting cementitious material for sealing active leaks. It may be used as a dry powder or thick paste to eliminate water infiltration prior to coating.
Raven 715 TDS (.pdf, 96 KB)
Raven 715 MSDS (.pdf, 66 KB)
Raven 750
Is designed as a reinforced, trowel applied high early strength underlayment / repair material. Raven 750 can be a stand-alone product or may be coated with Raven primers and topcoats as soon as the 750 is hard to the touch. Raven 750 is a proprietary Portland cement formulation
Raven 750 TDS (.pdf, 100KB)
Raven 750 MSDS (.pdf, 66 KB)
Raven 755
Is designed as a reinforced, spray applied high early strength underlayment / repair material. Raven 755 can be a stand-alone product or may be topcoated with Raven products within 3 - 6 hours. Raven 755 is a proprietary Portland cement formulation.
Raven 755 TDS
Raven 755 MSDS
|
 |
|
|
|
Raven Lining Systems offers zero VOC AquataPoxy® systems for corrosion control in potable water applications including water tank lining, reservoirs, transmission lines, aqueducts and treatment facilities. Our AquataPoxy epoxies are among the first to meet ANSI/NSF Standard 61 for contact with drinking water. These high-build sprayable epoxies adhere under adverse conditions including damp, moisture filled structures. They are proven to stop corrosion and eliminate exfiltration, and can be used to structurally rebuild severely deteriorated infrastructure.
Click on the links below each product to view product data sheets and material safety data sheets (you will need Adobe Acrobat to view these files).
AquataPoxy A-6
Originally developed in the late 1970's, A-6 epoxy coatings are the most widely specified 100% solids, zero VOC epoxy for potable water structures. A-6 is available in its original and thick version to seal all types of profiles from steel to rough concrete. Producing a well-adhered slick, dense surface, A-6 minimizes slime growth and bacteria build-up on protected substrates.
AquataPoxy A-6 TDS (.pdf, 118 KB)
AquataPoxy A-6 MSDS (.pdf, 63 KB)
AquataPoxy A-6T MSDS (.pdf, 64 KB)
AquataPoxy A-6 SuperFlex
A flexible solvent-free, 100% solids, toughened, corrosion resistant epoxy coating that can be applied to dry or damp surfaces. Formulated for broad range corrosion protection and to-be certified safe for potable water.
AquataPoxy A-6 SuperFlex TDS (.pdf, 116 KB)
AquataPoxy A-6 SuperFlex MSDS (.pdf, 44 KB)
AquataPoxy AquataPrime
A two component, flexible, blast-hold polyamide epoxy primer. Designed with an extended recoat window and certified safe for potable water when topcoated with AquataPoxy A-6 SuperFlex.
AquataPoxy AquataPrime TDS (.pdf, 112 KB)
AquataPoxy A-6 SuperFlex Thick
A flexible solvent-free, 100% solids, toughened, corrosion resistant epoxy coating that can be applied to dry or damp surfaces. Formulated for broad range corrosion protection and certified safe for potable water.
AquataPoxy A-6 SuperFlex Thick TDS (.pdf, 112 KB)
AquataPoxy A-6 SuperFlex Thick MSDS (.pdf, 44 KB)
AquataPoxy A-7
A unique moisture tolerant, putty-like grout used to fill holes and voids. A-7 is also used to perform underwater repairs in tanks, pipelines and vessels.
AquataPoxy A-7 TDS (.pdf, 117 KB)
AquataPoxy A-7 MSDS (.pdf, 64 KB)
AquataPoxy A-61
The purest, fastest curing potable water certified epoxy coating available. A-61's pure technology maintains water quality and provides corrosion control with its use in water tanks, food processing facilities and other sensitive water processing facilities and holding tanks.
AquataPoxy A-61 TDS (.pdf, 86 KB)
AquataPoxy A-61 MSDS (.pdf, 62 KB)
|
|
|
 |
| Specialty Products and Primers
|
|
|
|
|
Successful installation of a protective barrier system begins with proper surface preparation and sealing. Raven Lining Systems offers several penetrating primers and specialty products that provide good adhesion and sealing under adverse conditions, enabling sealing between other construction materials such as thermoplastic pipe materials, fiberglass, PVC sheet liners, calcium aluminates and other cements.
Click on the links below each product to view product data sheets and material safety data sheets (you will need Adobe Acrobat to view these files).
Raven 150
Adhesive used to create a sealed interface between PVC and other thermoplastic materials with Raven epoxies.
Raven 150 TDS (.pdf, 116 KB)
Raven 150 MSDS (.pdf, 65 KB)
Raven 155
Waterborne epoxy used to reduce water vapor transmission and seal green concrete surfaces prior to topcoat application.
Raven 155 TDS (.pdf, 116 KB)
Raven 155 MSDS (.pdf, 63 KB)
Raven 171
A solvent-free 100% solids, low viscosity penetrating epoxy primer or coating that may be applied to dry or partially damp surfaces. Designed to seal concrete and reduce off-gassing when concrete temperature is above 70°F.
Raven 171 TDS
Raven 171 MSDS
Raven 200
A dry polyolefin additive that may be added to any properly mixed Raven 400 series, it may be used as a work site additive to adjust the epoxies consistency to application conditions.
Raven 200 TDS (.pdf, 114 KB)
Raven 200 MSDS (.pdf, 20 KB)
Raven 210
Epoxy filler compound used to repair minor surface irregularities in concrete or steel. With the addition of Raven 200, it may be used to fill larger voids.
Raven 210 TDS (.pdf, 109 KB)
Raven 210 MSDS (.pdf, 38 KB)
|
|
|